Ultrasonic Flowmeter
| Min. Order: | 1 Piece |
|---|---|
| Production Capacity: | 100set/Sets |
| Payment Terms: | T/T |
Similar Items
Loading...
You May Like
Loading...
Product Description
Company Info
Product Description
Accuracy
Better than ± 1% for velocity above 0.6ft/s
Repeatability
Better than 0.2%
Response Time
0.5s
Velocity
0-32m/s
Display /Keyboard
Optional. LCD with backlight. 2× 20 letters.
Display instantaneous flow rate, accumulated flow rate
(positive, negative and net rates), velocity, time, analog inputs, ect.
Signal Input
Current input: 4-20mA., 0.1% accuracy. Can be used for signals
Such as temperature, pressure, liquid level, ect.
Signal Output
Current output: 4-20m A. Impedance 0-1k, Accuracy 0.1%
OCT output: Two channels. Can be programmed as pulse signal
For accumulated flow rate (positive, negative and net rates);
Frequency signal for instantaneous flow rate;
ON/OFF signal for relay drive or alarm drive; Batch control
Communication Interface
RS-232 and RS-485 (note: Can not be activated simultaneously)
Recording
Automatically record the following information:
L The totalizer data of the last 64 days/64 months;
L The time and corresponding flow rate of the last 64 times of Power on and off events. Allow manual or automatic Flow loss compensation
L The instrument working status of the last 128 days Powder
12VDC~24VDC
Can be customized to 12VDC or 5VDC
Liquid Types
Virtually all commonly used liquids (full pipe)
Liquid Temp 0c~100c
Liquid Suspension concentration
<20.000ppm, or, <2%, particle size smaller than 100um.
Pipe Size
DN25~DN6, 000mm (1''~240'')
Pipe Material
All metals, most plastics, fiber glass, ect. Allow pipe liner
Straight Pipe Section
Longer than 15D, where D is pipe diameter. If a pump is near,
The straight pipe section following the pump should be >30D Cable
Shielded transducer cable. Standard length 5m (15'),
Can be extended to (500m) 1640'. Contact the manufacturer
For longer cable requirement.
Cable should not be laid in parallel with high-voltage power line,
Neither should it be close to strong interference source Such as power transformers
Dimension
90× 90× 37mm
Weight:110g
Better than ± 1% for velocity above 0.6ft/s
Repeatability
Better than 0.2%
Response Time
0.5s
Velocity
0-32m/s
Display /Keyboard
Optional. LCD with backlight. 2× 20 letters.
Display instantaneous flow rate, accumulated flow rate
(positive, negative and net rates), velocity, time, analog inputs, ect.
Signal Input
Current input: 4-20mA., 0.1% accuracy. Can be used for signals
Such as temperature, pressure, liquid level, ect.
Signal Output
Current output: 4-20m A. Impedance 0-1k, Accuracy 0.1%
OCT output: Two channels. Can be programmed as pulse signal
For accumulated flow rate (positive, negative and net rates);
Frequency signal for instantaneous flow rate;
ON/OFF signal for relay drive or alarm drive; Batch control
Communication Interface
RS-232 and RS-485 (note: Can not be activated simultaneously)
Recording
Automatically record the following information:
L The totalizer data of the last 64 days/64 months;
L The time and corresponding flow rate of the last 64 times of Power on and off events. Allow manual or automatic Flow loss compensation
L The instrument working status of the last 128 days Powder
12VDC~24VDC
Can be customized to 12VDC or 5VDC
Liquid Types
Virtually all commonly used liquids (full pipe)
Liquid Temp 0c~100c
Liquid Suspension concentration
<20.000ppm, or, <2%, particle size smaller than 100um.
Pipe Size
DN25~DN6, 000mm (1''~240'')
Pipe Material
All metals, most plastics, fiber glass, ect. Allow pipe liner
Straight Pipe Section
Longer than 15D, where D is pipe diameter. If a pump is near,
The straight pipe section following the pump should be >30D Cable
Shielded transducer cable. Standard length 5m (15'),
Can be extended to (500m) 1640'. Contact the manufacturer
For longer cable requirement.
Cable should not be laid in parallel with high-voltage power line,
Neither should it be close to strong interference source Such as power transformers
Dimension
90× 90× 37mm
Weight:110g
Address:
Room101, No33, Huidayuan, Dalian, Liaoning, China
Business Type:
Manufacturer/Factory
Business Range:
Instruments & Meters
Company Introduction:
Dalian Teren Industry Instruments Import and Export Co., Ltd. is setting up in the beautiful city Dalian with the sea surrounded. We pay more attention on the running of instruments, our products include the ultrasonic flow meters, ultrasonic level meters, ultrasonic water meters, ultrasonic thickness meters and many the same series products.
Our business are estabished on the basis of good quality, good price and honest. All the customers will have our best services and share the most reasonable prices. We have very good cooperation with many enterprises in domestic and abroad. We have the good relationship with our partners in Australia, USA, UK, India, Italy and many other countries. We also have many domestic suppliers, and we are sure to supply you the satisfacted produtcs and good serives.
If you are interested in any items, or your customers require to fill, please contact us, we will provide you the products with high quality and good services, and reply you as soon as possible.
Our business are estabished on the basis of good quality, good price and honest. All the customers will have our best services and share the most reasonable prices. We have very good cooperation with many enterprises in domestic and abroad. We have the good relationship with our partners in Australia, USA, UK, India, Italy and many other countries. We also have many domestic suppliers, and we are sure to supply you the satisfacted produtcs and good serives.
If you are interested in any items, or your customers require to fill, please contact us, we will provide you the products with high quality and good services, and reply you as soon as possible.
){kind=link}